single motor mechanical clock 3d printed

Single motor mechanical clock 3d printed software#
Single motor mechanical clock 3d printed series#

The clock consists of 4 modules which work in a pair to display the time. The size was determined by the smallest screw hole that was possible. I mostly rebuilt it completely and challenged myself to print it as small as possible on a standard 3d printer using a standard nozzle. This project was inspired by another similar project that I saw a few years back. The spring drives the Swiss lever escapement that is embedded inside of the clock’s tourbillon and it will run for 35 minutes before it will need to be wound up again.Eptaora is a mechanical seven-segment clock project. Even the clock’s spring was 3D printed, and because the spiral plastic shape was so complex Laimer needed to tweak the settings on his Ultimaker 2 in order to get it to print correctly. However some of the more delicate and smaller-scale parts, like the hairspring and some of the gears, were printed with a 0.06 mm layer resolution. Most of the clock’s components were 3D printed in the Ultimaker’s standard 0.1mm layer resolution and none of the parts required any supports or rafting. Here is a video of Laimer explaining how his clock works and how he designed it: All in total Laimer 3D printed more than 50 individual parts to build his clock, and only needed to use a small amount of pins and screws to hold everything together.

Single motor mechanical clock 3d printed software#

The clock was designed in Autodesk’s Fusion 360 design software suite and was tested virtually to make sure that all of the parts would function as envisioned. I’ve seen a few larger clocks and simple gear mechanisms 3D printed, but this is the first time that I’ve seen a timekeeping device as complex and difficult to engineer as Laimer’s clock with a tourbillon. The case itself was printed in PETG while all of the internal gears and mechanisms were printed with standard PLA. The parts weren’t printed on an industrial 3D printer that makes end-use parts, but rather in his home on an Ultimaker 2 desktop 3D printer. Laimer’s clock is a marvel of clock design and an example of his 3D printing prowess. The clock was designed in Autodesk Fusion 360.īut Swiss engineer and Thingiverse user Christoph Laimer has successfully fabricated a working clock with a tourbillon that is made entirely from 3D printed gears, mechanisms and components.

Producing the small and delicate parts used to make a working tourbillon using traditional materials, usually solid metals, but sometimes even precious metals, is extremely difficult, but using 3D printed components to make a functional tourbillon is a remarkable achievement. Only the most skilled of watchmakers can create one that is accurate, and because they are so uncommon they are often shown off essentially as a status symbol or a sign of wealth. The art of watchmaking in this day and age is itself becoming a novelty, so watches with real tourbillons are even rarer and usually are only featured on very expensive watches due to their incredibly complex and difficult to engineer mechanics. Even most modern automatic watches don’t use real tourbillons anymore, and in fact horologists (people who study the measurement of time) have long debated whether they actually helped accuracy or were merely an expensive and complicated decoration.

Single motor mechanical clock 3d printed series#

Basically if you see a battery operated watch that has what looks like a series of gears exposed on the face then it is mimicking the look of an automatic watch with a tourbillon monitored second hand. In an era when most watches are battery operated tourbillons are pretty rare, however faux tourbillons are quite common. In case you’re not familiar with what a tourbillon is, it is a mechanical component to a watch that prevents gravity from slowing down the watch and reducing accuracy. Christoph Lamier’s working clock with a tourbillon.